RSR-XL - 32 dB
RSR-XL – 32 dB
21 April, 2017
SPECIAL RS
SPECIAL RS
21 April, 2017

RS-HA3 – 31 dB

Acoustic Sectional Doors

The RS range of acoustic doors designed and manufactured by Acústica Integral meets all market requirements. These are certified, high-performance, high-quality and robust doors.

Advantages

Take full advantage of the wide area available. Do not take up any indoor or outdoor space. Operate smoothly and silently. All our RS-HA doors comply with standard UNE EN 12341-1:2004, in force since 01 May 2005, and which rules on the mandatory installation of a safety system.

 Applications

Designed for both residential and industrial use. Garages, TV sets, warehouses, hangars, shipyards, etc.

Special Accessories (upon order)

RAL colour paint finish. Manufactured in stainless steel. Remote control. Acoustic vision panel.

TECHNICAL DATA

Description: Acoustic sectional door composed of overlapping panels with intermediate joints. Each panel is modular and freestanding. The panels are joined using special hinges.
Safe locking system.
Motorised electric opening system.
Characteristics of the panel:
• Light-grey coloured lacquered plate similar to RAL 9002
Height: 500 mm.
Maximum width: 5,000 mm.
Thickness: 100 mm.
Density RS-HA 3: 34 kg/m².

 

Sectional acoustic door RS-HA 3
Overall sound reduction index , Rw (C;Ctr): 31 (-1;-2) dB
Overall weighted sound reduction index A, RA: 31,2 dBA

STANDARD DIMENSIONS

Single leaf (W x H in mm)

Dimensions (W x H in mm.)
Model Dimensions (mm.) RS-HA 3
weight (kg)
RS-HA/01 3.00 x 3.000 306
RS-HA/02 4.000 x 3.000 408
RS-HA/03 5.000 x 3.000 510
RS-HA/05 3.000 x 4.000 408
RS-HA/06 4.000 x 4.000 544
RS-HA/07 5.000 x 4.000 680
RS-HA/09 3.000 x 5.000 510
RS-HA/10 4.000 x 5.000 680
RS-HA/13 3.000 x 6.000 612

(*) Models of over 750kg are not manufactured.
Maximum surface RS-HA3: 20 m²

ASSEMBLY INSTRUCTIONS

About metallic pre-frame

Firmly x the metallic pre-frame to the partition wall or the gyp- sum. Move the acoustic door (frame and leaf), always closed, towards the inside space of the pre-frame and shim the door until it is level. Spot weld for the rst time between the door and the pre-frame and check the vertical and horizontal levelling, do not open until de nitive welding has been nished. Carry out nal welding between the door and the pre-frame, once again check the levelling and open the door to verify that it works correctly. Seal the spans that remain between the pre-frame rim and door with insulating polyurethane foam or acrylic putty if there is just a little space. Keep the door closed as much as possible.

How to use

– Fitted with pressure handle: To open rmly grip the handle, turn it clockwise and push the leaf; to close it, rmly grip the handle, bring the leaf towards the rim and only then turn the handle anti-clockwise until it is closed.
– Fitted with latch handle: To open grip the handle, turn it clockwise and push the leaf; to close it, grip the handle and bring the leaf towards the rim.
– Fitted with panic bar: To open, push the bar downwards and push the leaf; to close it, grip the bar or handle and bring it towards the rim.

Use restrictions

Do not hit the door with anything that could deform it. Once the leaf is open don’t hang on it. Close the leaf gently without banging.

Preventive maintenance

We recommend an annual service, therefore Acústica Integral o ers a contract in which we service: Mobile door elements ( Hinges, handles and locks): cleaning, oiling, regulation and checking of good working order of all parts. Draught excluders and intumescent joints: substitution of damaged or badly working parts. Checking for looseness.

Diagrams / Plans

RELATED PROJECTS